MOVKZACV Practical Corner Radius Quick-jig Router Table Template Jig Arc Angle Half Fillet Locator Jig for Woodworking Trimming Tools for Routing Rounded Corners (1Set)

Features:
Material: Made of aluminum alloy and copper, anti-corrosion has a long service life. Accurate angle without damaging materials.
Clear Marking: Engraving and marking technology to make you easily identify, it will not easy to fade.
Specification:Semicircle templates with each diagonal are R10/R20/R25/R30 respectively,
which could meet your measuring requirements to make various sizes of roundness corner.
Batch Processing: Can be processed in batches, so that every corner can become a standard part.
Quickly Replace: Quickly replace the screws, so that the processing is more labor-saving and labor-saving.


Specifications:
Type: Router Template Set
Material: Aluminum Alloy, Copper
Color: Red
Size(L*W*H): About 98x98x46mm/3.86x3.86x1.81inch
Specification:R10/R20/R25/R30

Precaution:
1.A trimming cutter with a bearing on the top should be used.
2.The height of the milling cutter must be adjusted before use. When the machine is not turned on,
observe whether the milling cutter bearing and the fillet module are on the same plane to ensure
that the milling cutter will not scratch the module, otherwise it may cause danger.
3.The solid wood should be cut from left to right along the grain of the wood, not upside-grain milling.

Steps for usage:
(1) Loosen the middle copper screw, adjust it to the required corner, and tighten the screw.
Place it on the wooden board and hold the protrusion above the chamfering module,
close to the wooden board, and keep your hands away from the cutter.
(2) After sticking tightly, bring the wooden board close to the cutter and cut the sharp end
of the wooden board into a rough shape, and then walk it slowly by the side of the module.

Package Included:
1set x Router Template

• Wide Applications: Fixed in all kinds of the board to be ground into various shapes that allow carpenters easily and skillfully to make beautiful and rounded radian, such as exquisite picture frame, elegant table, and chair, edge and corner, etc..
• Specification:Semicircle templates with each diagonal are R10/R20/R25/R30 respectively, which could meet your measuring requirements to make various sizes of roundness corner..
• Material: Made of aluminum alloy and copper, anti-corrosion has a long service life. Accurate angle without damaging materials. Clear Marking: Engraving and marking technology to make you easily identify, it will not easy to fade..
• Batch Processing: Can be processed in batches, so that every corner can become a standard part. Quickly Replace: Quickly replace the screws, so that the processing is more labor-saving and labor-saving. Application: It should be used on workbenches such as flip-chip electric milling..
• Note: please do not use it on too thin boards..